Garland 1480 TQG Manual De Instrucciones página 33

4. MACHINE DESCRIPTION
4.1. CONDITIONS OF USE
The chipper is only designed to shred pieces of wood with a maximum diameter of 12 cm. It is prohibited
to shred any other material (for example metal, stones, plastics and any other material). If you want to shred
roots, remove the sand, mud or other residues before shredding. Any other use of the shredder not described
here, annuls the warranty responsibility of the manufacturer. Do not use this machine for any other purpose not
intended. The use of this machine for other than the designated operations may result in dangerous situations.
Utilice esta máquina en el exterior, en ambientes secos y temperaturas entre 5ºC y 45ºC.
Remember that the machine operator is responsible for the dangers and accidents caused to other people or
things. The manufacturer shall not be in any case responsible for damages caused by improper or incorrect use
of this machine.
4.2. DETAILED DESCRIPTION OF THE PRODUCT
1. Exit chute
2. Entry chute
3. Trailer coupling
4. SC System: (Switch-off safety system)
5. Muffler
6. Air filter cover
7. Accelerator
8. Petrol deposit stopper
9. Oil deposit stopper
10. On/off switch
11. Starter handle
12. Petrol cutting key
13. Air lever
14. Transport wheel
15. Wings nuts and safety switch
16. Bag with accessories
A
M8 25 3
M10 30 8 B
M10 30 4 C
M12 100 1
D
1
M12 70 1 E
M10 2 F
M10X30 4 G
H
M10X20 4
I
M8X20 2
Images and drawings in this manual are approximate and may not correspond with the actual product.
15
5
1
16
3
33/148
8
6
14
English
4
2
7
12
13
7
11
10
9