Kärcher K 5 Premium Smart Control Manual Del Usuario página 18

Safety devices
CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection.
Never modify or bypass safety devices.
Power switch
The power switch prevents unintentional operation of
the device.
High-pressure gun lock
The lock locks the lever of the high-pressure gun and
prevents the device from starting unintentionally.
Auto-stop function
If the lever of the high-pressure gun is released, the
pressure switch turns off the pump and the high-pres-
sure jet stops. The pump switches on again when the le-
ver is pressed.
Motor circuit breaker
The motor circuit breaker shuts off the device if power
consumption it too high.
Symbols on the device
Do not aim the high-pressure jet may at per-
sons, animals, live electrical equipment or
the device itself.
Protect the device against frost.
The device may not be connected to the
public drinking water network.
Assembly
For the illustrations, refer to the graphics page.
Place the screws provided and matching screwdriver at
the ready.
Fit the supplied loose parts onto the device before start-
ing up the device.
Fitting the wheels
1. Insert the wheels.
Note
Pay attention to the alignment of the hole.
Illustration D
2. Secure the wheels with 1 screw each.
Mounting the stand
1. Insert the stand.
Illustration E
2. Insert the 2 dowels into the holes as far as they will
go.
3. Secure the base with 2 screws.
Installing the spray lance storage
1. Hang the spray lance storage in position.
2. Secure the storage with 2 screws.
Illustration F
3. Secure the cover with 4 screws.
Illustration G
Mounting the transport handle
1. Attach the transport handle.
Illustration H
2. Secure the transport handle with 2 screws.
18
Mounting the accessory net
1. Hang the accessory net on the hooks.
Illustration I
Push the high-pressure hose through the
1. Insert the high-pressure hose through the hose
guide from the rear.
Illustration J
Installing the water connection coupling
1. Screw the water connection coupling onto the water
connection on the device.
Illustration K
Before start-up
Note
If you do not want to control the unit by mobile device via
®
a Bluetooth connection, you only need to follow the
steps in the section "Pairing the high-pressure gun".
Download the app and register your device
1. Download the KÄRCHER Home & Garden app (see
chapter KÄRCHER Home & Garden app).
2. Start the KÄRCHER Home & Garden app.
3. Register in the KÄRCHER Home & Garden app. If
necessary, create an account.
4. Scan the enclosed QR
The high-pressure cleaner is registered.
Note
If you do not have the enclosed QR code
can also register the unit with the part number and serial
number. Both numbers are specified on the type plate.
5. Follow the instructions in the KÄRCHER Home &
Garden app.
Note
Make sure that you activate Bluetooth
device before pairing the high-pressure gun.
Connecting the high-pressure gun
Note
You can find a detailed description of the connection at
https://www.kaercher.com/FCR.
6. Plug the mains plug of the high-pressure cleaner in-
to a mains socket.
The device switches to pairing mode for 60 s. Dur-
ing this time it is possible to pair the high-pressure
gun.
7. Simultaneously press the "+" and "-" buttons on the
high-pressure gun for at least 3 s.
If pairing is successful, the pressure levels as well
as the radio and Bluetooth
the display.
Illustration L
The Bluetooth
vice and the high-pressure washer is established
automatically.
Note
If necessary, you can also establish the Bluetooth
nection subsequently by pressing the "-" key for
10 seconds.
8. If the pairing attempt failed:
a Pull the mains plug of the high-pressure cleaner
from the socket.
b Wait 20 seconds.
c Pair the high-pressure gun again.
English
hose guide
®
code.
®
to hand, you
®
on your mobile
®
symbols are shown on
®
connection between the mobile de-
®
con-