CHANGING А NEEDLE
RU
14
Turn off at the power switch
То remove: Lower the presser foot
and raise the needle(s) to its/their
highest position. Take the needle
changing tool out of the accessory
Ьох and push it up over the needle
as far as it will go. Loosen (but do
not remove) the needle' s retaining
screw with the allen key and pull
the needle out from below.
Tо insert: lnsert the needle in hole
А of the needle changing tool so
that the flat side В of the needle
is opposite face of the tool. lnsert
the needle as far as it will go into
the needle holder (you may have
to push а little harder Ьу hand)
and tighten the retaining screw.
Remove the needle changing tool.
Needle
Needle
System
Size
EL х 705
11-14
(75-90)
EN
Туре ot
Fabrics
Light to
medium
weight fabrics
such as silk,
cottons, shirts,
blouse fabrics,
stretchy
fabrics, denim
& etc.