EFFEKTIV TRIUMPHATOR 2500X Manual De Usuario página 36

REMOVING THE KNIFE GUARD
RU
36
Remove the trim catcher and
open the front cover.
Pull the knife guard up and off.
То insert, place the knife guard
under latch А and push down into
the front cover guides.
lmportant notes оn sewing with
the top cover stitch sewing tаblе.
The sewing tаblе is marked
with various measurement
units. The figures at the top are
centimeters, those at the bottom
represent inches.
NOTE:
The sewing table (accessory) is
attached in the same way.
EN