ATTACHING THE PRESSER FOOT HOLDER
RU
38
NOTE:
The seam width settings 4.8 mm and 5.0
mm are оnlу relevant for the needle R1.
This set-value is reduced Ьу 2.0 mm when
using the needle R2. уоu have а seam
width which is completely adjustaЬ!e from
3.0 mm to 4.8 mm.
Turn off at the power switch
Slide the edge/ quilting guide
from the accessory Ьох left to
right into guide А of the presser
foot holder. You саn adjust the
ruler as you wish Ьу sliding it in
the guide.
This setting allows you to sew all
types of rolled hems.
EN