EN
THREADING THE LOWER OVEREDGE LOOPER
Threading Lower Looper (pink)
Turn the hand wheel towards
you until the lower looper is as
far to the right as possible.
А
: Lower Looper
Thread the thread in order from
1 to 9. Some of the thread
guides are marked with а pink
dot.
Push lever (а) down and hook
the thread оn the guide (Ь).
Pass the thread from front to
back through the hole (с) оn far
right end of the looper. Draw the
thread back to the left under the
presser foot, leaving а 10cm (4
inches) tail.
RU
20