EFFEKTIV TRIUMPHATOR 2500X Manual De Usuario página 39

USER MANUAL
REPLACING THE UPPER KNIFE
TRIUMPHATOR 2500X
Removal: Set the seam width
adjustment knob to 3.5mm and
secure the upper knife in place.
Loosen screw А with the spanner
from the accessory Ьох and
remove the upper knife.
lnsertion: lnsert the new upper
knife and tighten screw А very
slightly.
Turn the hand wheel until the
upper knife is in its lowest
position.
ln this position, the front edge of
the upper knife must Ье 0.5 to
1.0 mm below the cutting edge of
the lower fixed knife.
When you have adjusted the
upper knife precisely, you саn
tighten retaining screw А fully.
Loosen the screw to the upper
knife.
RU
39