Publicidad
Idiomas disponibles
Idiomas disponibles
Once time programming is done, you can modify or erase it. To do so, select the zone
where time programming have been done and press on the time programming icon.
After entering, you will see highlighted in green colour days
Group where there already exists a time program. Select the desired group and
confirm by pressing on
a) Edit: Do as steps from point 3.7.2
b) Stand-by: Deactivate the time programming defined. To reactivate it repeat
process but selecting "Activate". Once action is selected, confirm by pressing
c) Erase: Select this option to erase time program from memory. Confirm by
pressing
Function Sleep.
3.9 ZONE NAME ADJUSTMENT
This option allows personalizing the name of every zone on your system. The process is as
follows:
1) Enter Remote Zone Access menu either by pressing directly on main screen on the
zone label area (see Fig. 1) or by the menu pressing on icon and then selecting
"Remote zones"
2) Press on change name icon (
change name (p.e.
3) Change the name by using the pad
vertical arrows to change letter). Once finished, press to confirm
On any time of the process you can cancel go to previous screen by pressing on the
go back main screen by pressing on the
icon. Then choose among three options:
icon.
icon.
) and then on the zone for which you wish to
+
)
(use horizontal arrows to move curso; use
icon.
.
icon or
43
Publicidad
