Publicidad
Idiomas disponibles
Idiomas disponibles
3.5 REMOTE ZONE ACCESS
* On fancoil installations, it will swap zone indicator and fan speed. Press when Tacto screen displays zone
indication
By means of any thermostat, you can enter any other zone of the installation in order to change
some of its main parameters, or even command every zone
follows:
1) On the main screen (see Fig. 5), press hold for two
second the zone indication
2)
. Thermostat will display the first zone reachable
(see Fig. 6).
3) Use selection arrows
and confirm with a short press on the
will display the remote zone status.
4) Modify any parameter and confirm by pressing on the
icon. Modifiable parameters when remotely
accessing are:
• Zone On/Off status
• Set-point temperature
• Working mode
accessing master thermostat).
• Fan speed (only when accessing master thermostat
and if available).
3.6 BATTERY REPLACEMENT
On wireless thermostats, when LOW BATTERY
change batteries for new ones.
To replace batteries, insert a coin in the slot placed at the bottom of it and turn the coin until
thermostat opens. Once touch screen is separated from the support, replace batteries taking
care for the polarity (2 AAA 1'5V batteries). Assemble again both parts to its original position.
52
.
to select the zone to control
.
.
ALL
at the same time. Do as
icon. It
. (only when
con
appears, it indicates the need to
i
Fig. 5
Fig. 6
Fig. 7
Publicidad
