Publicidad
Idiomas disponibles
Idiomas disponibles
2) Press the
appears. Press the
Press once to adjust +/- 10 PPM. Press and hold the button to accelerate setting in
fast speed. The highest CO2 alert level is 5000 PPM.
3) Press the
Note: your monitor will store your settings and exit the alert set mode when no key
is pressed in approximate 10 seconds.
When the measured CO2 reaches the set high / low alert level, the related
icon appears and flashes to remind you.
Use the audible CO
•
Press the
the
icon appears on the display.
•
When the measured CO2 reaches the set high alert level, both the
icons flash and an audible beep sound will be given continuously. The beep
sound will accelerate when the measured CO2 level exceeds more over the set
alert level.
If this happens, please open the windows, adjust the air ventilation and avoid
too many people gathering together to improve the air quality of your
environment.
•
Press the
CO2 exceeds the set high alert.
To Recall the Maximum, Minimum Value Memory
button once again, the CO2 digits "2000" (default) flash and
or the
button to confirm.
alarm (for high alert)
2
button once to turn on the CO2 alarm. When the alarm is on,
button to disable the CO2 voice alarm.
button to adjust the high alert level of CO2.
EN4
or
and
remains flashing if
Publicidad
