Techno Line WT 534 Manual De Instrucciones página 20

alarm 2.
Notes:

If there is no button operation within 20 seconds, the clock will
automatically quit the setting and return to normal time display.

While setting the value, press and hold the "
quickly adjust the setting values.

The alarm will sound for 2 minutes if you do not deactivate it by
pressing any button. In this case the alarm will be repeated
automatically after 24 hours.
Turn OFF the alarm sound

When the alarm tone is ringing, press any button except the "SNOOZE"
button to stop the alarm sound.

The alarm will sound again on the next day.
Snooze function
When the alarm tone is ringing, press the "SNOOZE" button to end the alarm
sound and enter snooze mode. The alarm signal sounds again after a 8
minute snooze duration.
Temperature in °C or °F
Press the "
Backlight and projection function
DC-adapter mode

When using the power adapter, the backlight and projection will always
light up. Press the "
turn it off. The setting order for the brightness is: light  medium 
dark  OFF  light  medium  dark......

Press the "
" button once to switch the temperature unit to °C or °F.
" button to adjust the backlight brightness or
" button and the projection will rotate by 180 degrees.
EN8
" or " " button to