General Safety Instructions - Clatronic EKP 2419 Instrucciones De Servicio

28400-05-EKP 2419/DKP 2420
GB
• Before commissioning this device please read the instruction manual
carefully.
• Please keep these instructions, the guaranty certificate, the sales receipt and, if
possible, the carton with the inner packaging!
• The device is intended exclusively for private and not for commercial use!
• Always remove the plug from the socket whenever the device is not in use, when
attaching accessory parts, cleaning the device or whenever a disturbance
occurs. Switch off the device beforehand. Pull on the plug, not on the cable.
• In order to protect children from the dangers of electrical appliances, never leave
them unsupervised with the device. Consequently, when selecting the location
for your device, do so in such a way that children do not have access to the devi-
ce. Take care to ensure that the cable does not hang down.
• Test the device and the cable regularly for damage. If there is damage of any
kind, the device should not be used.
• Do not repair the device yourself, but rather consult an authorised expert.
• A damaged mains lead may only be replaced with a similar cable by a qualified
electrician as special tools are needed.
• Keep the device and the cable away from heat, direct sunlight, moisture, sharp
edges and suchlike.
• Never use the device unsupervised! Switch off the device whenever you are not
using it, even if this is only for a moment.
• Use only original accessories.
• Do not use the device outdoors.
• Under no circumstances must the device be placed in water or other liquid, or
come into contact with such. Do not use the device with wet or moist hands.
• Should the device become moist or wet, remove the mains plug from the socket
immediately. Do not reach into the water.
• Use the device only for the intended purpose.
Special Safety Measures for this Device
• The machine becomes hot when in use. Pay particular attention to the hot top
plates and the viewing window.
• Remember that the hot surfaces remain hot a long time after operation.
• Place the machine on a heat-resistant base.
• Only touch the machine by using the handles and buttons provided.
18
25.11.2002 14:05 Uhr

General safety instructions

Seite 18