Roger Technology H85/TDS Instrucciones Y Advertencias Para El Instalador página 18

1
General safety precautions
ROGER TECHNOLOGY cannot be held responsible for any damage or injury due to improper use or any use other than
the intended usage indicated in this manual.
practices and in compliance with applicable regulations.
Before installing the product, make sure it is in perfect condition.
Disconnect the mains electrical power before performing any work. Also disconnect any buffer batteries used.
Only use original spare parts when repairing or replacing products.
The packaging materials (plastic, polystyrene, etc.) should not be discarded in the environment or left within reach of
children, as they are a potential source of danger.
WARNING! Handle electronic parts and terminals with extreme care, as these parts are highly sensitive to static
electricity.
2
INTERFACE INPUT VOLTAGE
CURRENT ABSORPTION
MAXIMUM NUMBER OF KEYPADS THAT CAN BE LINKED
MAXIMUM NUMBER OF DIGITS PER USER CODE
MINIMUM NUMBER OF DIGITS PER USER CODE
NUMBER OF OUTPUTS AVAILABLE
NUMBER OF USER CODES THE INTERFACE CAN STORE
OUTPUT ENABLING TYPE:
OUTPUT TYPE
MAXIMUM COMMUTABLE POWER
(RESISTANCE LOAD)
RELAY ACTIVATION DELAY
MAXIMUM INTERFACE-TO-KEYPAD CABLE LENGTH
BACKLIT KEYPAD
OPERATING TEMPERATURE
DEGREE OF PROTECTION
DEGREE OF PROTECTION
PRODUCT DIMENSIONS
WEIGHT
PRODUCT DIMENSIONS
(*) Power the H85/DEC or H85/DEC2 interface with ROGER TECHNOLOGY control units. Alternatively, use safety-
compliant power supplies. The use of NON safety-compliant power supplies can cause hazards.
3
Description
The H85 code-based control system enables automated motorized systems to be controlled by entering a code. The
system comprises minimum 1 to maximum 4 H85/TDS numeric code keypads compatible with the H85/DEC interface
card, or minimum 1 to maximum 2 H85/TDS keypads compatible with the H85/DEC2 interface card.
18
H85/DEC
24 VAC-DC;
12 VDC
1 keypad 20mA
1 keypad + interface on standby 40 mA
1 keypad + interface with active relay 50 mA
4
6
3
4 for control;
1 for alarm
500
deadman's switch (enabled until key is released)
relay, voltage free contact
load in AC-DC: 60 VA/24 W
maximum current: 1 A
maximum voltage: 30VAC-DC
100 ms
100 m (two-core cable, 0.5 mm
6 white LEDs, two intensity levels
-10°C
H85/TDS : IP54
H85/DEC/BOX
H85/DEC/BOX
158x119x76
279 g
H85/TDS/I dimensions in mm. 75x77x60 Weight: 106 g
dimensions in mm. 75x77x41 Weight: 101 g
H85/TDS/E
H85/TDS/TRIX dimensions in mm. 75x98x58 Weight: 242 g
H85/DEC2
24 VAC-DC;
2
2 for control
2 )
+55°C
IP54 H85/DEC2/BOX
H85/DEC2/BOX
126x52x25
62 g
IPX0