Descargar Imprimir esta página

Andis BTF-2 Instrucciones De Uso Y Cuidado página 3

Ocultar thumbs Ver también para BTF-2:

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Never drop or insert any object into any opening. Insert only
recharging transformer plug into trimmer receptacle.
6. Do not use outdoors or operate when aerosol (spray)
products are being used or where oxygen is being
administered.
7. Do not use this appliance with a damaged or broken
blade or comb as injury to the skin may occur.
8. Always attach plug to appliance first, then to outlet.
To disconnect, turn all controls to "off" then remove plug
from outlet.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR HOUSEHOLD USE
OPERATING INSTRUCTIONS
To start trimmer, move ON/OFF switch button to ON position, to stop, move switch
button back to original position.
CHARGING UNIT
The trimmer is not charged at the factory. Please charge trimmer for 12 hours
(overnight) before first use for maximum performance.
Remove trimmer and AC adapter from carton. Note that the trimmer on/off switch
must be in the off position for the battery to charge. Plug adapter cord directly into
bottom of the trimmer (Figure A). The green light on the trimmer will turn on.
You can keep the trimmer plugged into the adapter when not in use. The adapter
will maintain the battery at full charge and the green light will stay on. The unit has a
nickel metal hydride battery that cannot be damaged by overcharging. However, we
recommend that the adapter be unplugged if the trimmer won't be used for seven
or more days.
3

Publicidad

loading