Kenmore FeatherLite DU1040 Manual De Uso Y Cuidado página 11

2. Detach the power cord plug from the
power cord.
3. Be sure the power cord is locked into
the lower locking notch and the upper
locking notch as shown. This will help
manage the power cord when operating
the vacuum cleaner.
NOTE:
Lock the power cord into the
lower locking notch first and then lock
it into the upper locking notch to avoid
damaging the power cord.
Make sure the power cord can move freely
and is not over-extended when locking it
into the lower locking notch.
POWER CORD - RELEASE & USE
Upper Locking
Notch
Lower
Locking
Notch
4. Plug the power cord plug into an outlet
located near the floor.
WARNING
Personal Injury and Product Damage
Hazard
· When any abnormality/failure occurs,
stop using the product immediately and
disconnect the power plug.
· DO NOT use outlets above counters.
Damage from cord to items in
surrounding area could occur.
5. Press the power button with your foot to
turn the vacuum cleaner on.
6. Once you have completed vacuuming,
press the power button again; unplug the
power cord plug from the outlet.
7. To store power cord after use, turn upper
cord hook to the upright position. Then
wrap cord loosely around cord hooks.
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly puts stress
on the cord and can cause cord damage.
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage.
- 11 -