Nederman NOM 18 Manual De Instrucciones página 15

Caution! Risk of filter damage.
Do NOT use high washing pressure.
Caution! Risk of filter damage.
The main filters are to be suspended, as if fitted in the NOM filter unit, during washing and
drying.
The main filters are NOT to stand by themselves or lean, for example, against a wall, during
washing and drying, see Figure 7.
To clean the coarse prefilters and main filters:
Wash from above (main filters from the inside and out) with a water-based degreasing agent. Use
a max. temperature of 60 °C for the main filters.
Let the filters dry before they are refitted, or alternatively, dry them by refitting them in the NOM
filter unit and running the fan until dry.
The main filters can be cleaned multiple times. However, after cleaning, the service life of the
filters may be shorter depending on its area of application.
7.3 Drain pipe
When small metal particles contaminate the oil reservoir, it is necessary to ensure that the drain
pipe will not become clogged.
7.4 Oil reservoir
Check the level in the oil reservoir and drain the oil, if required.
7.5 Spare parts
Contact your nearest authorized distributor or Nederman for advice on technical service or if you
require help with spare parts. See also www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
8 recycling
The product has been designed for component materials to be recycled. Its different material
types are to be handled according to relevant local regulations. Contact the distributor or
Nederman if uncertainties arise when scrapping the product at the end of its service life.
9 Acronyms and abbreviations
HEPA High efficiency particulate air
NOM Nederman oil mist filter
NOM 18/28 EN
15