Publicidad
Idiomas disponibles
Idiomas disponibles
---
4.
Initial commissioning
4.1
---
Installing SCT 418
Mounting SCT 418, see SCT 418 Help Center:
---
SCT 418 Help Center:
https://help.boschdiagnostics.com/
SCT418/#/home/InitialCommission-
ing/en/default
---
4.2
Installing the
"Bosch ADAS Positioning" software
Depending on the product version ordered, the
"Bosch ADAS Positioning" software can be installed via
a USB stick or via the "DDM" software (Diagnostics
Download Manager).
4.2.1
---
Installing "Bosch ADAS Positioning" via USB
stick
Also, the current software version as well as all
previous software versions can be downloaded
from the Bosch Media Library:
loads.bosch-automotive.com.
1. Connect the USB stick to the laptop/tablet.
2. Run " Bosch ADAS PositioningSetup.exe" from the
USB stick.
3. Select the language for the installation wizard.
The installation wizard will start.
4. Read and follow the installation instructions.
Once the installation is complete,
"Bosch ADAS Positioning" can be used.
---
4.2.2
Installing "Bosch ADAS Positioning" via DDM
The "Bosch ADAS Positioning" software is provided via
the "DDM" software (Diagnostics Download Manager).
The customer number and password are included
on the delivery slip of the Bosch diagnostic pro‐
gram.
1. If you have not yet installed DDM, download and in‐
www.downloads.bosch-
stall DDM:
automotive.com/en/ddm/esi20-eu
2. Use the customer number and password to log into
DDM.
3. Perform the one-time configuration of DDM.
4. Select "Bosch ADAS Positioning" for installation.
"Bosch ADAS Positioning" is installed on the lap‐
top/tablet.
Updates for "Bosch ADAS Positioning" are auto‐
matically installed via DDM.
---
4.3
Initializing cameras using QR codes
The "Bosch ADAS Positioning" software is installed
2x camera QR codes are available
---
The "Bosch ADAS Positioning" software guides
you step by step through the camera initializa‐
tion.
Robert Bosch GmbH
1. Launch "Bosch ADAS Positioning".
2. Plug the USB connecting cable into the laptop/
tablet.
The camera will be initialized.
The camera image will be displayed.
3. Read and follow the instructions on the screen.
Both cameras are ready for operation.
The serial numbers of the cameras are saved in
---
5.
5.1
---
---
www.down‐
1. With its prongs (1), place 4x wheel holders on the
tire tread.
2. Make sure the spacers
tire.
The two QR codes are specific to the respective
camera. If the camera is not recognized during
camera initialization, use the other QR code.
the settings.
Operation
Mounting the wheel holder with ref‐
erence board
Before positioning the SCT 418, make sure that
there are no objects in the calibration area that
can be damaged by the indicator bar.
Rear wheels: Use reference boards CTA 403-x.
Front wheels: Use reference board CTA 400-x.
Calibration procedures that use the front bumper
as a reference point do not require wheel holders
to be attached to the front wheels.
(2)
touch the sidewall of the
The spacer must touch the sidewall of the tire. If
the spacer touches the rim, the reference board
is not positioned accurately. It is not be possible
to align the SCT 418 accurately.
1 689 989 518 | 2022-07-24
SCT 418 | 7 | en
Publicidad
