PLAYKIN BMW X6M Manual Del Usuario página 67

PLACE THE STEERING COLUMN (NORMAL TYPE)
NOTE: If your vehicle is equipped with the remote control, please refer to the next
page.
1
×
Turn the vehicle body on its side.
1. Slide a Ø12 washer into the steering column from the straight end.
2. Insert the straight end of the steering column through the hole in the front of the vehicle body
from the underside, and out through the hole in the dashboard.
3. Insert the bent end of the steering column through the hole in the steering.
4. Fit a Ø12 washer on the bent end of the steering column.
5. Insert a split pin into the hole in the bent end of the steering column and bend the split pin
ends back with a long nose pliers (not supplied).
2
Steering column
67
Hole in the direction
of the bar
EN