Remove the M5x35 bolt and the Ø5 nut from the handwheel. Turn the vehicle body upright.
5.
Place the steering wheel on the steering column, which protrudes from the centre of the
steering wheel base.
6.
Align the holes on each side of the steering wheel with the holes on the end of the steering
column.
7.
Tighten a nut on the opposite end of the bolt to secure the steering wheel to the steering.
End of steering column
Steering column
CONNECT THE POWER SUPPLY
Fuse box
MODEL 1
1.
Plug the red fuse connector into the battery terminal.
2.
Plug the vehicle connector into the engine connector on the body as shown above.
MODEL 2
1.
Plug the red fuse connector into the battery terminal.
2.
Plug the vehicle connector into the engine connector on the body as shown above. Repeat for
the other side.
.
Top rear view
Rear Top View
Fuse box
Battery
1
1
69
6
6
5
2
2
7
7
EN