Descargar Imprimir esta página

Oster POGGM3902G Manual De Instrucciones página 30

Publicidad

Idiomas disponibles

Idiomas disponibles

18. Memory Function
(1) Press "0/MEMORY" to select the memory of procedure 1-3. The display will show 1,2,3.
(2) If the procedure has been programmed, press "START/+30 SEC." to use it. Otherwise, program the procedure.
Only one or two steps can be programmed.
(3) When finished programming, press "START/+30 SEC." once to save the procedure and return to the standby
stage. If you press "START/+30 SEC." again, cooking will start.
Example: to program the following procedure as the second memory, it is memory 2.
to cook a food with 80% of the microwave power for 3 minutes and 20 seconds, the steps are as follows:
a. In the standby stage, press "0/MEMORY" twice, stop pressing when the display shows "2".
b. Press "TIME COOK" once, then press "3", "2", "0" in order.
c. Press "POWER" once and "PL10" will appear on the display, then press "8" and "PL8" will appear.
d. Press "START/+30 SEC." to record the program. The buzzer sounds once and then returns to standby status.
If you press "START/+30 SEC." again, the procedure will be recorded in memory 2 and will work.
e. If the power is not interrupted, the procedure will be recorded all the time. If it is, the procedure will need to be
reprogrammed.
f. If you want to start the recorded procedure in the standby stage, press "0/MEMORY" twice, the display will show
"2", then press "START/+30 SEC" to start.
19. Check Function
(1) In the cooking status, press "CLOCK/TIMER", the display will show the clock for three seconds.
(2) In the microwave cooking status, press "POWER" to see the microwave power level, and the current power will
be displayed. After three seconds, the oven will return to the previous state. In the multiple state, the check can be
performed in the same way as above.
20. Child lock function
Lock: In standby status, press "STOP/CANCEL" for 3 seconds, you will hear a long "beep" to signal the start of the
child lock status, the display will show "
".
Unlocking: In the locking state, press "STOP/CANCEL" for 3 seconds, there will be a long "beep" to signal
unlocking.
21. Cooking end reminder function
When cooking is finished, the buzzer will sound 5 "beeps" to warn that cooking is finished.
22. Other specifications
(1)In standby status, if the digital clock shows the current time, the icon " : " would have a reflection; otherwise it
will show "0:00".
(2)When programming the status function, the display will show the corresponding programming.
(3)In running or pause status, the display will show the extra cooking time.
English-13

Publicidad

loading