Publicidad
Idiomas disponibles
Idiomas disponibles
Energy-Saving Function
In waiting state and reminding state, press "
1.
will go off and set to energy-saving mode.
If no operation in10 minutes under waiting state, the LED display will go off and
2.
go into energy-saving mode.
Under the energy-saving mode, press any key or rotate any knob can quit the
3.
energy-saving mode.
Reservation Function
To use reservation function, clock must be set in advance. Then, in the way of setting
1.
the clock, reserved time that oven starts to cook must be set (a> Press reservation
setting button "
be within 0--23. c> Press reservation setting button "
set minute time of reservation. Time should be within 0--59.), but don't press clock
this time. Next, turn knob " K1 " to choose function.
Press "
" button to set cooking time and temperature. Then turn knob " K1 " to
2.
adjust time, and " K2 " to adjust temperature.
Press the "
" button to finish cooking setting, and the clock will be on the screen
3.
with reservation sign "
presented. Reservation time can be checked by pressing "
screen will show clock again.
At the time of reservation, cooking will start automatically after a buzzing sound. The
4.
reservation symbol "
Note:
-
Lamp, defrost, probe can't be reserved.
-
During the status of reservation, press cancel button once, time and temperature
of reservation menu will be shown with menu icon lighting constantly. Press again,
screen returns to clock, or press start button to return to reservation status.
-
Reminder function is invalid during reservation status.
"; b> Rotate " K2 " to set the hour time of reservation. Time should
" always lighting. But no other function signals are
" will put out, and other indicating signs will work normally.
" for three seconds, the LED display
" again; d> Rotate " K2 " to
", 3 seconds later the
36
Publicidad
