power level to 0.
sensor for 2 seconds, the related zone
and
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
When this risk disappears,
Warning:
in a short time on the power
display. This showing is related
with setup operation and it does
not mean the
Warning:
H indication is used for the safety
purposes in any case. Even if the
power on, H indication appears.
SWITCHING OFF THE DEVICE
time by pressing the general on/off
touch key
H will appear in the zones that are hot.
The rest of the displays will not light up.
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation you
can lock the entire unit, except for the
key
child safety. When the lock is activated,
However, remember when the touch
the lock is activated (the lock indicator
On the other hand, if the touch control
is switched off, the locking function
To deactivate the locking function, press
the locking touch key
control will be ready for use.
CHILD LOCK
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to prevent
children from turning on the hob.
Activating Child Lock :
The hob is switched on via
Any zone should not be selected.
When any zone is not selected,
During Child Lock, if user touch any
Warning : Child lock status is not being
stored. If the energy of the hob is butted,
child lock status could not be preserved.
Deactivating Child Lock :
To be able to deactivate Child Lock, the
Child Lock should be activated before
and all power display show "L"
Flash Cooking
(Automatic cook start)
This function facilitates cooking as
you do not need to be present while it
is being done. The touch control pre-
programmes the chosen hot plate at
the maximum power and subsequently
lowers it to the desired power level
approximate amount of time (see
Table 1
Selected
Power
0
1
2
3
4
5
6
7
.
8
9
SWITCHING THE AUTOMATIC
COOK START FUNCTION ON
EN
Automatic Cook
Start Function
0
1
3
5
7
9
3
4
5
-
7