Publicidad
Idiomas disponibles
Idiomas disponibles
EN
mains, check if the voltage and
the hob label, which is placed under
the hob or on the Guarantee card, or if
applicable on the technical data sheet,
which you must keep together with
this manual throughout the product's
service life.
The electrical connection will be via
an all-pole circuit breaker or plug,
whenever accessible, in accordance
with the current and with a minimum
3 mm distance between contacts. This
ensures disconnection in emergencies
and allows hob cleaning.
service can handle or repair the
appliance, including replacement of
the power cable.
Ensure that the inlet cable does not
come into contact with the hob housing
or the oven housing, if it is installed in
the same unit.
Warning:
The electrical connection
must be properly grounded,
following current regulations,
otherwise the hob may malfunction.
Unusual high power surges
can damage the control system
(like with any electrical appliance).
Keep the Guarantee
Certificate or the technical data
sheet together with the instructions
manual throughout the product's
service life. These contain important
technical information.
Fig 2
6
U s e
a n d
Maintenance
User instructions of the
Touch Control
HANDLING ELEMENTS
2
Hot plate selection touch keys.
**Power and/or residual heat
displays.
"Decrease" power touch key.
"Increase" power touch key.
Locking touch key for the rest of
touch keys.
**Lock icon.
Timer touch key.
**Timer display
The timed cooking surface
indicator
* Depending on model
** Only visible while running.
The manoeuvres are done by means
of the touch keys. You do not need
to exert force on the desired touch
key, you only need to touch it with
function.
SWITCHING ON THE DEVICE
time, it will be locked and the related
touch
locking touch key
1 Touch the switching on touch key
The Touch Control is activated and a 0
appears with 50% brightness on all
If any zone has residual heat indication
before switch on ,the display continue
s showing ''H'' instead of 0.
If you do not take any action in the next
10 seconds the touch control will
SWITCHING ON A HOT PLATE
Once the Touch Control has been
activated by means of the touch key
1 Press the touch key for the selected
and
brightness
indicator will increase.
2 Using the touch key
choose the desired power level.
The
and
touch keys are
repetitive, so if you keep them pressed
they increase or decrease with a 0.5
second interval.
Only one hot plate can be selected at
the same time
Warning:
To operate a hot plate, it must
use a hot plate,check the brightness
of the power indicator.
Quick switch-on at maximum
power: Once you have selected the
hot plate, press the touch key
once. The hot plate will be activated at
full power.
SWITCHING OFF THE HOT PLATE 1
The hot plate must previously be
selected.
2 Using the touch key
of
or
Publicidad
