BGS technic 72089 Instrucciones De Uso página 5

ADDITIONAL INFORMATION
•
Each torque wrench has been carefully lubricated at the factory.
•
After a long period of non-use, turn the torque wrench a few times from the lowest to highest
torque value in order to distribute the lubricant in the mechanism.
•
After using the wrench, it is essential to turn the handle back to the lowest setting value to relieve
the spring.
•
Do not turn the handle beyond the maximum or minimum torque value.
•
Never try to turn the handle when it is locked with the lock wheel.
•
Only clean the torque wrench with a dry cloth.
•
Never immerse the torque wrench in cleaning agents or other liquids.
COMPONENTS
1 Hand twist wheel
2 CW/CCW Switch
3 Quick Release Button
O Applying the force on the middle of the handle.
Do not applied the force at the front or rear of the handle only.
X
Do not applied the force in direction to the front or rear.
6 Sleeve
7
Scale ring
8 Hex nut
9 Middle of the handle
10 Lock wheel
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
4
5
A Ratchet handle should keep 90 degree with screw
B
Turn lock wheel clockwise to lock the handle
C Turn lock wheel counter-clockwise to unlock the handle
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Primary scale
Secondary scale
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed