Medtronic REVEAL LINQ Manual Del Paciente página 25

Using your Patient Assistant
You or a helper should follow these steps while you are having
symptoms or as soon as possible afterward, as directed by your doctor:
1. Press and release the Record Symptoms button [
hear a short beep and see the Telemetry Status light flashing green
(Figure 2 shows where the light is located).
2. While the Telemetry Status light is flashing, hold the Patient Assistant
up to your cardiac monitor. The side with the button can be held
facing you or away from you (see Figure 3). Your cardiac monitor
may be inserted in a different location than shown here.
Using your Patient Assistant
]. You should
25