Samsung DA68 Manual Del Usuario página 31

STEP 4 Bracket Installation
A
A. Product height
B. < 10 cm
C. > 10 cm
STEP 5 Support Installation
Untitled-6 31
1. Position the bracket so that the part
C
B
2. Push the product in and securely
When pushing the product in, make sure
the power cord does not get stuck between
the brackets.
1. Lay the product down on the floor on
with the holes is up against the wall
at the same level as the height of the
product and secure the bracket in place
using two screws.
- If the wall is a concrete wall, use a
concrete drill.
position it under the left and right
brackets.
- Make sure the bracket is covering
at least 10 cm from the back of the
product.
CAUTION
its rear.
Undo the single screw next to the left
and right wheels on the rear side of the
product.
English 31
2021-07-09 12:23:42