Samsung DA68 Manual Del Usuario página 49

A
B
A: 50 mm
B: 100 mm
Untitled-6 49
06
07
06
3. Attach the foam(s) to maintain a gap
between the two refrigerators.
A. Pair install with the one door model:
- If the gap between refrigerators
is 7 mm, use four T7 LEX foams
(06) and attach them to one of the
refrigerators.
- If the gap between refrigerators
is 15 mm, use eight T7 LEX foams
(06) and attach them to one of the
refrigerators. (Stack two foams for
each position.)
- See the figure for the position of the
foams.
B. Pair install with the BMF (Bottom-
mounted freezer) model:
- Attach the T5 PE foam (07) on the
BMF (Bottom-mounted freezer)
model, and then attach four T7 LEX
foams (06) on top of the T5 PE foam
(07).
- See the figure for the position of the
foams.
NOTE
You must attach the T5 PE foam (07) to the
BMF (Bottom-mounted freezer) model only.
(In case you install two different types of
refrigerators in pair.)
4. Align the two refrigerators.
- Check the alignment at the top and
front of the refrigerators and realign
them if necessary.
English 49
2021-07-09 12:23:46