SIKUCONTROL32 John Deere 7R 6777 Instrucciones De Uso página 8

The new vehicle is automatically saved by the system
and so you can drive it immediately. The vehicle that
was last added is always the operational one. If you
now want to switch between the vehicles stored on the
same level, press the Level A button once (or more than
once if there are more then two models). Every time
this button is pushed, the next model that is saved is
triggered.
d) Deleting the model from memory
Turning off the remote control module deletes the mo-
dels stored in the internal memory of the module. Ho-
wever, a system restart as in section (a) or (b) adds the
models again. If a vehicle is switched off with its opera-
ting switch, then it is automatically deleted from the list
of active models in the remote control module, and can
be added to any other remote control module. If the
model is turned off by accident, or if a battery has to be
changed, then once it has been switched back on, the
model can be reintegrated back into the module via the
procedure in section (c).
5. The front loader
This high quality SIKUCONTROL32 model is fitted
with an electronically controllable front loader.
The front loader can be operated using the two thumb
wheels to the right and left of the ON/OFF switch. The
right hand thumb wheel moves the entire loading arm
up or down. The shovel is tipped using the left hand
thumb wheel. The shovel is to be removed from the front
loader using a handle. To make this possible, the shovel
is equipped with a snap-in-place system.
Removing the shovel:
Move the front loader into the dismantling position
using the D button. Pull the shovel from the loading arm
and from the tipping bar, using gentle pressure. When
doing so, hold the lever on the tipping bar between
your thumb and forefinger.
14
Attaching the shovel:
Use the D button to move the holder for the front loa-
der into the mounting position. Push the shovel onto the
loading arm by applying a little pressure. Hold the lever
on the tipping bar between your thumb and forefinger,
and also apply gentle pressure to the shovel.
In addition, the front loader can be moved into a par-
allel mode with the P button. In this mode, the attached
device is always moved parallel to the ground, thus ma-
king it easier to stack pallets, bales of hay, stones, etc. In
this mode the tipping function of the attached device is
deactivated. By pressing the P button again, this mode
is deactivated.
General functions of the model
-
proportional
Rear coupling controlled electronically -
proportional
and off)
(can be switched on and off)
at front (can be switched on and off).
"Headlights" button multiple times.
Technical Specifications
Original
Manufacturer John Deere
Model Tractor 7280R
Overall length 5278 mm
Overall width 2544 mm
Overall height 3313 mm
Power 206 kW / 280 HP
Cylinders
Cubic capacity 8984 cm
Weight 10910 kg
Model
Material Metal and plastic parts
Dimensions 187 x 92 x 115 mm
(excluding front loader)
Power units 1 drive and 4 servomotors
Energy 3x AAA batteries
Control 2.4 GHz radio remote control
Weight approx. 600 g
Speed approx. 0.2 m/s
6. Maintenance and cleaning
Use only dry and dust-free cloths to clean and care for
SIKU products.
In order to guarantee the design-related safety level of
this model in the long term, the model must be checked
regularly by an adult for any visible damage.
7. Disposal of disused electrical equipment
When they have reached the end of their working life,
these products must not be disposed of with ordinary
solid domestic waste, but should be deposited at a
collection point for recycling of electrical and electro-
nic equipment. This is indicated by the symbol on the
product, in the instructions for use, or on the packaging.
The materials are recyclable as specified by their label-
ling. You make a major contribution to the protection
of the environment by recycling, salvaging materials,
or re-using spent goods in other ways. Please consult
your local authorities about the waste collection point
in your area.
8. Troubleshooting
You will find a list of potential faults which you can fix
yourself on our Internet site at: www.siku.de
Sieper GmbH
Schlittenbacher Strasse 60
58511 Lüdenscheid
Germany
Manufactured under licence from John Deere
6
3
15