TARGET GROUP
This manual is written both for operators and for qualified machine maintenance technicians. Operators must not perform operations that should
be carried out by qualified technicians. The manufacturer is not liable for damages resulting from failure to comply with this veto.
ENG
PRESERVATION OF THE USER
The Use and Maintenance Manual must be stored in its special pouch close to the machine, protected from liquids and anything else that could
compromise its legibility.
ON CONSIGNMENT OF THE MACHINE
When the machine is consigned to the customer, an immediate check must be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not suffered damage during transportation. If this is the case, the carrier
must ascertain the extent of the damage at once, informing our customer service office. It is only by prompt action of this type that the missing
material can be obtained, and compensation for damage successfully claimed.
INTRODUCTORY COMMENT
A vacuum cleaner can only function well and work effectively if it is used correctly and kept in full working order by carrying out the maintenance
tasks described in the attached documentation. We therefore suggest you read this instruction booklet carefully and read it again whenever
difficulties arise while using the machine. If necessary, remember that our assistance service (organised in collaboration with our dealers) is
always available for advice or direct intervention.
IDENTIFICATION DATA
For technical assistance or to request replacement parts, always give the model, the version and the serial number (written on the relevant
plate).
TECHNICAL DESCRIPTION
The FV-CART is a vacuum cleaner which uses the vacuum created in the collection tank by the fan (operated by the electric motor) to pick up
dust and dry solid elements measuring up to 2cm at room temperature, as the accessories brush against the floor surface and furnishings. The
vacuum hose channels the air into the collection tank, where the dust and solid residues are trapped by filters. The machine must only be
used for this purpose.
INTENDED USE
This machine was designed and built for the cleaning (by vacuuming solid, dry elements) of smooth, compact flooring in the commercial,
residential and industrial sectors by a qualified operator in proven safety conditions.
ATTENTION: the machine is not suitable for use in the rain, or under water jets.
IT IS FORBIDDEN to use the machine in environments with an explosive atmosphere to clean dangerous powders or flammable liquids.
In addition, it is not suitable as a means of transport for people or objects.
SAFETY
Operator cooperation is paramount for accident prevention. No accident prevention programme can be effective without the full cooperation
of the person directly responsible for machine operation. The majority of occupational accidents that happen either in the workplace or whilst
moving are caused by failure to respect the most basic safety rules. An attentive, careful operator is most effective guarantee against accidents
and is fundamental in order to implement any prevention programme.
SERIAL NUMBER PLATE
10
9
8
7
6
The serial number plate is located at the rear of the machine, and indicates the general
characteristics thereof, specifically the serial number of the machine. The serial number is a
very important piece of information and should always be provided together with any request
for assistance or when purchasing spare parts. The serial number plate contains the following:
1.
The weight of the battery that power the machine (expressed in kg).
2.
The IP protection rating of the machine.
3.
The gross weight of the machine (expressed in kg).
4.
The machine ID code.
5.
The machine serial number.
6.
The machine ID name.
1
7.
The nominal power consumed by the machine (expressed in W).
8.
The year of machine manufacture.
2
9.
The nominal voltage of the machine (expressed in V).
3
10.
The commercial name of the machine, and the manufacturer's address.
4
5
16