Fimap FV-CART Manual De Instrucciones página 20

ENG
1
1
8
9
6
Before beginning to work, it is necessary to:
1. Carry out the steps necessary to secure the machine, see paragraph "MACHINE SAFETY" on page 17.
2. Make sure the collection tank is empty, otherwise empty it completely, reading chapter "ROUTINE MAINTENANCE" on page 21.
3. Remove the cover (2) of the vacuum tank (Fig.2), using the hooks (1) on the side of the tank itself (Fig.1).
4. Make sure the fabric filter (3) is correctly positioned (Fig. 3).
5. Make sure the fabric filter (4) is correctly inserted (Fig. 4).
6. Place the cover on the vacuum tank, using the hooks to fasten the cover to the tank.
7. Check that the nozzle (5) on the vacuum hose (6) is correctly inserted in the hole (7) on the cover of the vacuum tank (Fig.5).
8. Connect the handle (8) on the vacuum hose with the telescopic tube (9) (Fig.6).
9. Select the most suitable accessory for the work to be carried out.
10. Connect the accessory (10) with the telescopic tube (9) (Fig.7).
11. Insert the battery (11) into the battery compartment at the rear of the machine, ensuring that the battery poles are facing towards the top of
the machine (Fig.8).
12. Press down on the battery until the retainers in the battery move into position.
1
1
1. Turn on the machine, turning the main switch (1) to the "I" position (Fig.1).
2. If you are using the combined brush, set the switch (2) on the brush body to "HARD SURFACE" or "CARPET" depending on the floor to be
cleaned (Fig.2).
3. Proceed with the vacuuming.
N.B.: If the vacuuming capacity is excessive, shift the lever (3) on the vacuum hose handle (Fig. 3) while the accessory is in contact with
the floor.
N.B.: On the front part of the machine are four LEDs of different colour, a red one and three green ones, which indicate the battery
charge level (Fig.4).
N.B.: When only the red LED remains ON, a critical charge level has been reached, turn off the machine and recharge the battery, read
the paragraph. "RECHARGING THE BATTERY" on page 18.
PREPARING TO WORK
2
3
2
9
10
11
7
STARTING WORK
2 3
2
4
3 4
8
3 4
20
6
5
7
5