Publicidad
Idiomas disponibles
Idiomas disponibles
10. Set the flue gas valve to be fully closed with the
operating knob pressed in completely (see fig.
09.20007.023).
11. Fit the inside cable with the nipple (1) supplied into
the valve mechanism.
12. Check the damper is working properly.
13. Fit the operating knob onto the fireplace cover in a
position where it can be easily reached.
Subject to change because of technical improvements
Placing the thermostat sen-
sors
1. Fit the pump control thermostat sensors (3 and 4)
09.20007.022
and the cold-water protection sensor (1) (see fig.
09.20007.035).
Make sure the thermostat sensors are in proper
contact by filling the empty space in the con-
nection casing.
4
1
09.20007.023
3
5
09.20007.035
7
Publicidad
