Dovre 2575 CBS WW Instrucciones De Instalacion Y Uso página 30

1 Cold-water protection sensor
3 Pump control thermostat sensor, water side
Pump control thermostat sensor, flue gas
4
valve side
5 Pump control terminal box
Installing the insulating cover
- second part
1. Cut the insulating sheets for the top panels of the
insulating cover to size.
Insulating sheet, front panel:
775 x 730 mm (see 09.20007.015).
Insulating sheet, top rear panel:
775 x 730 mm (see 09.20007.016).
Insulating sheets, top side panels:
(2x): 330 x 730 mm (see
09.20007.017).
Insulating sheet, top panel (cover)
685 x 340 mm.
8
2. Slide the insulating sheets into the top panels of
the insulating cover.
3. Fit the top rear panel and the top side panels of the
insulating cover.
4. Cut the holes needed for the various connections
into the insulating sheets of the top panels.
a. Mark the positions of the holes by
putting the insulating sheets over
the connections and pressing
lightly.
Subject to change because of technical improvements