Stihl BG 56 Manual De Instrucciones página 13

English / USA
Assembling the Suction Tube
: Line up the arrows of the suction
tube and extension – push the tubes
together so that they snap into
position.
1
2
Mounting the Suction Tube
: Shut off the engine.
Insert screwdriver in the tab (1),
swing it to the right to disengage the
intake screen (2) and then open the
intake screen.
12
3
6
4
: Line up the arrows (3).
: Push the suction tube into the fan
housing stub (4) as far as stop.
: Push the union nut (5) over the fan
housing stub and rotate it in the
direction of the arrow until the tab
(6) engages the hole (7) in the union
nut.
: Continue turning the union nut in
direction of arrow to tighten it down
firmly.
Removing the Elbow
: Shut off the engine.
: Insert a suitable tool through the
hole in the union nut and press
down the tab.
: Rotate the union nut in direction of
arrow as far as stop.
: Remove the elbow.
BG 56, BG 66, BG 66 C, BG 86, SH 56, SH 86