Publicidad
Idiomas disponibles
Idiomas disponibles
|
Replacement Parts Information
For repairs or routine maintenance, Fill‑Rite offers the parts you need. The following parts diagram and list covers all applicable parts for your Fill‑Rite product. These parts can be
obtained through any authorized Fill‑Rite dealer. Be sure to use only genuine Fill‑Rite replacement parts for your service and maintenance needs. For a list of authorized dealers,
please visit fillrite.com..
WARNING
DO NOT open or attempt to repair the motor on your NX25‑120 & NX25‑240 series pump. Opening the motor case can compromise the integrity
of the Explosion Proof construction and will void any existing warranty and certification (UL listing). Please refer to the Warranty Policy
located on page 2.
KIT321RK - Overhaul Repair Kit
KIT321RG - Rotor Kit
KIT320SL - Shaft Seal Kit
KIT321FLG - Flange Kit
Servicing Rotor, Vanes, and Shaft Seals
The rotor, vanes, and shaft seals are inside the pump housing, and are accessed through
the rotor cover located on the face of the pump. It is held in place with three 4mm hex
drive attaching bolts. You can access the rotor and vanes for inspection and cleaning,
but DO NOT attempt to remove the shaft seals without a new seal kit to install.
Always inspect the rotor cover seal and mating surface (groove) for nicks or damage prior
to reassembly. Be certain o‑ring is not pinched to prevent leakage. Torque the attaching
hardware to 44 in‑lbs.
fillrite.com
NX25-120 & NX25-240 SERIES AC FUEL TRANSFER PUMPS
KIT321BV - Bypass Kit
KIT321NB - Nozzle Boot Kit
KIT321SK - External Seal Kit
KIT321JC - Junction Box Cover kit
INSTALLATION AND OPERATION MANUAL
KIT321BG - Inlet Kit
KIT321SW - Switch Kit
KIT321ASN - Anti‑Siphon Kit
12
Publicidad
