ZIGOR ZGR SOLAR STR 250 Manual De Operación página 57

ZGR SOLAR STR 250
2.3 ZGR SOLAR STR 250 construction
No NAME
1 LED indicator panel
2 Labels
3 Additional grounding terminals
4 Bottom handles
5 Side handles
6 Mounting ears
7 Wiring area
Five LEDs are set on the board of the inverter, as shown in
LED lamp Color LED state
Green Always on
Flicker in cycle
Oûff
Blue Flicker for once
Off
Operation manual
Fig. 2-4 ZGR SOLAR STR 250 appearance
DESCRIPTION
HMI interface to indicate the present working state of the inverter.
Nameplate.
Use at least one of them to ground the inverter.
Used to move the inverter.
Used to move the inverter.
Used to hang the inverter onto the mounting-bracket.
DC switches, AC terminals, DC terminals, and communication
terminals.
Table 2-2 Parts of the ZGR SOLAR STR 250 inverter
Fig. 2-5 LED board
Meaning
Normal grid-connected operation.
There is power of DC or AC, but there is no grid-connected operation.
AC and DC are both disconnected with power.
Communication for once.
No signal.
www.zigor.com 8