Publicidad
Idiomas disponibles
Idiomas disponibles
ZGR SOLAR STR 250
Fig. 4-11 Level the assembled mounting-bracket and mark the positions for drilling holes
3) Secure the mounting-bracket with bolts (Fig. 4-12 and Table 4-3).
4) Take out the inverter from the packing case.
5) Hoist the inverter to the installation position when necessary (refer to 4.3.2). If the installation position is
not high enough, skip performing this step.
6) Hang the inverter to the mounting-bracket and ensure that the mounting ears perfectly engage with the
mounting-bracket (Fig. 4-13).
7) Fix the inverter with two M6×35 screws (Fig. 4-14).
Operation manual
Fig. 4-12 Fastening sequence
ITEM
COMPONENTS
A
Mounting-bracket
B
Full threaded bolt
C
Metal bracket
D
Flat washer
E
Spring washer
F
Hex nuts
Table 4-3 Fastening sequence
Fig. 4-13 Hang the inverter
www.zigor.com
DESCRIPTION
-
M10*35
-
-
-
M10
17
Publicidad
