ZIGOR ZGR SOLAR STR 250 Manual De Operación página 67

ZGR SOLAR STR 250
4.3.4 Wall-mounting installation
The procedure to install the ZGR SOLAR STR 250 on Mounting-bracket is as follows:
The tools recommended are (Table 4-1):
ITEM
Phillips screwdriver/ electric screw driver
Marker
Level
Hammer drill
Socket wrench
Wrench
The spare parts (Table 4-2):
ITEM
Grub screw
Marker
Level
Follow these steps to mount the inverter:
1) Assemble the mounting-bracket by using the connecting bar (Fig. 4-10).
2) Level the assembled mounting-bracket by using the level, and mark the positions for drilling holes on the
installation site. (Fig. 4-11).
Operation manual
Fig. 4-14 Fix the invertir
SPECIFICATION
M4, M6
-
-
Drill bit (Select according to expansion bolt specifications)
Including 16mm socket
Opening: 16 mm
Table 4-4 Recommended tools
QUANTITY SPECIFICATION
2 M4 x 10
2 M6 * 35
4 M10 x 95 (recommended) Self-prepared
Table 4-5 Recommended spare parts
Fig. 4-15 Connecting bar
www.zigor.com
SOURCE
Delivery scope
Delivery scope
18