Publicidad
Idiomas disponibles
Idiomas disponibles
FUNCTIONS AND LED INDICATORS
Appliance on/off
1
Start "vacuum and sealing" function
2
Start "sealing" function (without vacuum)
3
Start "external vacuum packing" function (for vacuum packing with flexible hose
and adapter)
4
NTC smart temperature control. When the temperature of the sealing tape exceeds
the pre-set safety temperature, the appliance automatically goes into safety mode.
5
1. On/Off button
When this button is pressed, the BLUE light turns on, the appliance is now ready for use.
2. "Vacuum and sealing" button
When this button is pressed, the light turns BLUE and flashes,
this means the appliance is sucking the air from the bag. When the bag has a sufficient
vacuum, light 3 Seal turns RED, this means the bag is being sealed. Once sealing is
complete, the light turns off and only the ON light 1 on/off stays BLUE.
3. Sealing button
This button is needed to seal without any air suction. When sealing only, place the bag
outside the
light 1 on/off stays BLUE.
4. External vacuum button
When you press this button, the device starts to suck; as soon as all the air is sucked in,
the indicator light goes out, the appliance stops working and only indicator light 1 on/off
stays BLUE.
5. NTC smart temperature control
When the temperature of the sealing tape exceeds the pre-set safety temperature (60°C),
the appliance automatically goes into safety mode: the red and blue lights flash alternately
and the buttons are disabled. Wait and leave the appliance to cool for 2 minutes, then the
appliance will automatically return to normal operating conditions.
Other functions of LED indicator lights
•
When the appliance remains idle for 180 seconds without any type of operation being
performed, the power light
20
suction
device. Once sealing is complete, the light turns off and only the ON
turns off automatically.
Publicidad
