SOLAC Great Lakes Instrucciones De Uso página 9

ENGLISH
DESCRIPTION
A Water tank
B Steam button
C Power cord
D Light indicator
E Steam head
F Handle
G Water tank release button
H Fold button
I Fabric brush (accessory removable)
J Bag
K Cup
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
- Fully extend the appliance's power
cable before each use.
- Do not start the appliance without
water.
- Use the handle to hold or transport
the appliance.
- Do not use the appliance tilted, or
turn it over.
- Do not turn the appliance over while
it is in use or connected to the network.
- Do not force the appliance's work
capacity.
- Unplug the appliance from the mains
before refilling the water tank.
- Unplug the appliance when not in
use and before carrying out any cleaning,
adjusting, loading or changing accessories.
- Store this appliance out of reach
of children and/or persons with physical,
sensory or reduced mental or lack of
experience and knowledge.
- Do not store the appliance if it is still
hot.
- Use the appliance and its
accessories and tools in accordance with
these instructions, taking into account the
working conditions and the work to be
performed. Use the appliance for operations
different from those intended could result in a
hazardous situation.
- It is advisable to use distilled water, especially
if the water in your area contains clay or if it is
"hard" (containing lime or magnesium).
- Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- CAUTION: Water condensation may appear
on the surfaces and objects around this
appliance.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all products' packaging has
been removed.
- Some parts of the appliance have been
lightly greased. Consequently, the first time
the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
- To eliminate the smell given off by the
appliance when used for the first time, it is
recommended to have it on at full power for 2
hours in a well-ventilated room.
- Prepare the appliance according to the
function you wish to use:
- When operating the garment steamer for
the first time, allow it to steam for a few
minutes, this will remove any impurities
and odours that might have been left by the
manufacturing process.
- When operating the steam garment for the
first time, you may want to try the steamer on
an old piece of fabric before steaming your
fabric.
FILLING WITH WATER: (FIG 1)
- You must fill the water compartment before
turning on the appliance.
- Open the tank by pressing the opening
button.
- Open silicone cover.
- Fill the tank with water till MAX.
- Close the cover
- Put the tank back into its place by pressing
the opening button, and fill the guides.
EN