Publicidad
Idiomas disponibles
Idiomas disponibles
SET UP & USE
PARTS LIST
Tools Required: Screwdriver and Drill.
NOTE:
15S = 2 short butterfly screws. Used for installing Support Rails, to L-BP and R-BP
pieces. Must be inserted so that wing is on exterior side of unit.
25S = 14 short butterfly screws. Used for installing Connecting Rails, L-BP and R-BP
pieces to vertical rails. Must be inserted so that wing is on exterior side of unit.
35M = 4 medium butterfly screws. Connects diagonal support rails. Must be inserted
so that wing is on rear of unit.
45L = 6 long butterfly screws. Must be inserted through vertical rail first then
tightened into Reinforcing Bars.
25S
L-BP
45L
LF1-1
LB2-1
Anti-tip Bracket
35M
25S
Connecting Rail
LB2-2
LF1-2
35M
Support Rail
45L
25S
Reinforcing Bar
25S
15S
L-BP
Page 4
Reinforcing Bar
R-BP
25S
RF1-1
RB2-1
Anti-tip Bracket
35M
Connecting Rail
25S
35M
Support Rail
RF1-2
RB2-2
25S
45L
25S
15S
R-BP
Publicidad
