Publicidad
Idiomas disponibles
Idiomas disponibles
16
1
2
(Fig. 3)
Illustrative image
11.4 Seat adjustment
(Fig. 4)
Illustrative image
ADJUSTMENT OF THE SEAT HEIGHT
(Fig. 5)
Illustrative images
The seat can be adjusted using the seat post height adjustment.
1. Fold the backrest, pulling up the lever located on the left side of the seat, then stand behind
the scooter and, after pushing down the lever located below the seat (right side), with both
hands lift the seat from the seatpost (Fig. 5);
2. Remove the bolt+nut from the seat post rod, then adjust the seat post to the desired height,
reinsert and tighten the bolt+nut completely (Fig. 6);
3. Reinsert the seat in the seat post (Fig. 7).
TIPPING THE ARMRESTS
Raise the armrests to assist getting on and/or off the scooter.
SLOPING THE ARMRESTS
Turn the adjustment knob in an anti-clockwise direction
to increase the slope of the armrests. Turn the
adjustment knob in a clockwise direction to reduce the
slope of the armrest
ADJUSTING THE ARMREST HEIGHT
Turn the knob in an anti-clockwise direction
point 2)
, pull the knob outwards and move the armrest
vertically to increase or reduce the armrest height.
Release the knob and turn it in a clockwise direction once
you have chosen the desired height.
SEAT DEPTH LEVER
The depth of the seat can be adjusted. Pull the lever
(Fig. 4 - point 1)
1
position. Release the lever.
2
SEAT ROTATION LEVER
The seat can be rotated through 360 ° and locked at
every 45 °.
Press the lever down and rotate the seat to the desired
position (Fig. 4 - point 2). Release the lever to lock the
seat in position.
(Fig. 6)
(Fig. 3 - point
1).
and position the seat in the desired
(Fig. 7)
(Fig. 3 -
Publicidad
