Publicidad
Idiomas disponibles
Idiomas disponibles
EN
13. 4mm Tips Replacement
14. Cleaning
Prior to cleaning, remove the instruments from all
measurement circuits.
If the instruments are dirty after daily usage, it is
advisable to clean them by using a damp cloth
and a mild household detergent. Never use acid
detergents or dissolvent for clean-ing. After
cleaning, do not use the voltage tester till it is
dried completely.
15. Transport and Storage
In order to avoid instrument damage, it is
advised to remove batteries when not using the
instrument over a longer period.
The tester must be stored in dry and closed areas.
In the case of an instrument being transported in
extreme temperatures, a recovery time of
minimum 2 hours is required prior to instrument
operation.
11
Publicidad
