HYDAC International GSV Instrucciones De Servicio página 26

7. Maintenance
625558411-5
NOTICE
Safety devices may only be disassembled by
HYDAC Customer Service.
Safety devices are basically maintenance-
free.
The GSV must undergo repeat testing
according to the national regulations at an
approved inspection agency. In the Federal
Republic of Germany, for example, this is
regulated by the "Industrial Safety Regu-
lation" (BetrSichV) or EN 14359.
If a GSV is leaking, it can be repaired by the
manufacturer. The repair must only be carried
out by HYDAC.
8. Disposal
625690891-5
Disassemble the safety device (where
EN
possible) into its constituent parts and
dispose of them according to material type in
accordance with national laws and directives.
9. Customer service
625722123-5
Service, repeat testing and repairs can be
carried out at the HYDAC head office or at all
national and international HYDAC sales and
service centres.
Contact at Headquarters
HYDAC Systems & Services GmbH
Werk 13
Postfach 1251
66273 Sulzbach/Saar
Friedrichsthalerstr. 15
66540 Neunkirchen/Heinitz
Germany
Tel.: +49 6897 509-01
Fax: +49 6897 509-324
www.hydac.com
26 / 80
INT 3.504.BA8/03.23