Descargar Imprimir esta página

senya SYCN-VC008G Manual De Instrucciones página 48

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
Name of the device
Covered area by the robot
and Position of the latter
Instant duration of
cleaning routine
Water level
Only mop mode select
 Spot mode
 Area mode
 Room mode
 Auto mode
3.1 Cleaning mode of robot
The robot provides 4 kinds of cleaning mode: Spot mode,Area mode, Room mode and Auto mode.
CAUTION! Before use, please clear all scattered lines/wires on ground to avoid wrapping and cause the
robot works incorrectly.
3.1.1 Spot mode
This mode is the most effective when cleaning a particularly dirty area. With SPOT mode, the robot
concentrates on a 1.5m x 1.5m area. At the same time, it activates its MAX vacuum power to vacuum
the dust from the floor more easily.
2
1
3
Spot
1. Click <Spot>.
2. Select the point to be cleaned on the map.
3. Click <Star> to start cleaning.
Edition
Instant battery life
Instant cleaned surface
UVC mode select
Restricted Area Setting
Partition editing
 Recharge/Pause
 Start/Pause/Continue the robot
 Fan level selection
 Options:Other settings
47

Publicidad

loading