senya SYCN-VC008G Manual De Instrucciones página 51

 The Ultraviolet light turns off immediately when the robot is lifted off the ground.
UVC OFF
UVC ON
Sterilization
3.2.4 Restricted Area
Set restricted area on the map so that the robot can't enter the restricted area to clean.
Note:The restricted area function is suitable for areas that need to be protected, such as in front of
mirror or baby playground，etc.
1
1 . Click
<Restricted Area>
E.g:
 The <No mopping> restricted area is set in room 5, when the robot turn on the mop mode of water
tank, it will not enter the restricted area.
 The <No sweeping> restricted area is set in room 4, when the robot turn on the suction mode of
dust container, it will not enter the restricted area.
 A virtual wall is set up in room 3, when the robot will be prohibited enter to room 3.
Keep the current clean mode and turn off the Ultraviolet function
Keep the current clean mode and turn on the Ultraviolet function
Turn off the current cleaning mode, no suction power, and only turn on the UV
function for sterilization.
2 . Click <No sweeping> and <NO
mopping> to create restricted
area on the map so that the robot
can't enter the created area for
designated cleaning.
1
2
50
1
2
3 . Click <Wall>,Then click <Add
a virtual...> to create virtual
lines on the map so that the
robot can't enter a certain area.