senya SYCN-VC008G Manual De Instrucciones página 54

Enter Edition interface, you can find below function
1 My little ......
2 Device information
3 Offline Notification
4 Share Device
5 FAQ & Feedback
4. Mop mode of robot (with Water tank)
If you need to use the Mop function, please contact Senya's after-sales service (service-
client@senya.fr) to purchase a water tank mop.
Note:
 The Mop mode can only be used for cleaning hard floor, please DO NOT use it on carpet.
 To achieve a better mopping effect, please clear dust first before use Mop mode.
 If during working, you want to add water or clean mop, please pause the robot, remove the water
tank and mop to add water and clean mop, then assemble them back and resume working.
 The mop can only wipe floor, If it is the stubborn stain, you can sprinkle a cleaner on the floor and
use to higher water level.
 At the end of each cleaning routine, remove water tank and empty it then let's drying it.
1) Preparation before use
Step 1: Stick the mop
on the bottom of water
tank
2) After finish cleaning
Get out the Water tank, remove the mop cloth, empty the water inside the tank,clean the mop cloth
and dry it for next time use.
CAUTION! Please use clear water only to clean water tank, do not use soap water,or detergent etc.
Modify the Icon and Name for your robot
Network information will be shown here
When you select it, you will know when you the robot lost network
Click here to share your robot to other people so he/she can also
command the robot with Application
For normal questions you may face during using, you can find answer
here
Step 2: Add water into
the tank with a small
cup, max 400ml
53
Step 3: Remove the
dust container and
insert water tank with
mop