senya SYCN-VC008G Manual De Instrucciones página 50

1
2
Note:
1) You can select different suction power level (Quiet/Auto/Strong/Max) to clean your room.
2) The robot may not work on some black carpets because the sensor cannot recognize it.
3) After finish cleaning, it will go back to charging base automatically.
4) the robot will stop cleaning and go back the charging base for recharging automatically if the power
left less than 15%.
5) In below situation the robot possibly can not find the charging base:
 The Charging base is moved to different position during cleaning.
 The Charging base is not connected with power/socket.
 the robot is moved by hand to different position/room during cleaning.
 The house size is too big, or too many obstacles/walls inside the house.
3.2 Operating control of
3.2.1
Water level
When the robot places the water tank, Dry tow/Low/Middle/High 4 level optional.
Note:It only applies to the water tank,Not suitable for dust container.
3.2.2 Only mop
You don't need any settings.
3.2.3 UVC mode
Ultraviolet light has a unique sterilization and disinfection effect,It can directly destroy bacteria and
viruses.
Note:
 The Ultraviolet light can only be turned on when the robot is cleaning.
 The Ultraviolet light is off when the robot is paused, has an error, is charging or is in standby.
1. Click <Auto>.
2. Click <Star> to start clean.
Application
49