Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Before using the pump the user shall read the instructions. Read and follow all the safety and
operating instructions to reduce personal injuries and damage to the pump.
SAVE THIS INSTRUCTION MANUAL
You will need the instruction manual to check the safety and caution rules, assembly instructions, maintenance
and operation procedures, installation and electric diagram.
TECHNICAL CHARACTERISTICS:
Code
Description
Voltaje
Frecuency
Current
Maximum Flow
Maximum Total
Maximum Depth
Inlet / Outlet
diameter
Maximum water
inlet pressure
Minimum water
inlet pressure
Maximum temperature
Maximum liquid temperature
Work Cycle: 50 minutes' work x 20 minutes' rest
Maximum 6 hours' daily
Power Cord Grips used in this product: Type "Y".
Pump Build Quality: Basic Insulation
Insulation Class: I
Thermal insulation on motor winding: Class B
ATTENTION
When the power cable gets damaged it should only be replaced by the manufacturer or at a
Truper
Authorized Service Center. Avoid the risk of electric shock or severe injury
®
Power Cord Grips used in this pump is Type "Y".
The build quality of the electric insulation is altered if while in use spills or liquid get into the tool.
WARNING
Before gaining access to the terminals all
power sources should be disconnected.
1
PREM-1/2
PREM-3/4
102384
Multistage pressure booster pump
6 A
18.4 gal/min
20 gal/min
65.6 ft
28 PSI
PREM-1
102385
102386
127 V
60 Hz
7.5 A
10.5 A
21 gal/min
82 ft
19.6 ft
1 NPT
35 PSI
50 PSI
22 PSI
35.6 °F to 104 °F
140 °F
PREM-1-1/3
102387
12.5 A
22 gal/min
118 ft
150 ft
65 PSI
This symbol indicates this pump
is in compliance with Official
Mexican Standard (NOM)
Publicidad
