Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
WARNING
• Always detach the battery pack from the tool before any assembly, adjustment,
transportation, or storage. Failure to do so could result in serious injury.
1. To Attach Battery Pack
a. Align the raised portion on the battery pack
with the grooves on the tool, and then slide the
battery pack into the tool as shown.
b. Make sure that the latch on the battery pack
snaps into place and the battery pack is
secured to the tool before beginning.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on battery pack
aligns with the groove on the tool and the latches
snap into place properly. Improper attachment of
the battery pack can cause damage to internal
components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull out the battery pack and remove it from the tool.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery pack
when the tool is not in use or when transporting the tool.
1
Battery-release buttons
12
Publicidad
