Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTION
2
Safety information
en
2.1
Intended use
3
Product description
3.1
Operating and status indicators
6
O P E R A T I N G I N S T R U C T I O N | GTE2 Flat
NOTE
Highlights useful tips and recommendations as well as information for efficient and
trouble-free operation.
Instructions to action
The arrow denotes instructions to action.
b
1.
The sequence of instructions is numbered.
2.
Follow the order in which the numbered instructions are given.
✓
The tick denotes the results of an action.
Connection, mounting and configuration of the product must only be car‐
ried out by qualified personnel.
This product does not constitute a safety component as defined in the
NO
Machinery Directive.
2006/42/EC
SAFETY
Do not install the product in places exposed to direct UV radiation (sun‐
light) or other weather conditions.
The product must be adequately protected against moisture and contami‐
nation.
The GTE2F is an opto-electronic photoelectric proximity sensor (referred to as "sensor"
in the following) for the optical, non-contact detection of objects, animals, and persons.
If the product is used for any other purpose or modified in any way, any warranty claim
against SICK AG shall become void.
Energetic photoelectric proximity sensor.
8025415.1HTH/2023-03-02 | SICK
Subject to change without notice
Publicidad
